포스트백 테스트
Test your enabled postbacks to verify proper communication between Branch and your ad partner.
Overview
설정 테스트는 마케팅 캠페인을 시작하기 전에 시간을 내어 완료할 것을 적극 권장하는 매우 중요한 단계입니다.
다음 가이드는 포스트백이 올바르게 실행되고 광고 파트너에게 모든 관련 데이터를 전달하는지 확인하는 방법을 안내합니다.
전제 조건
In order to test postbacks, you need to have completed the following:
- Completed the Universal Ad Partner Integration Guide
- Added a Test Device to your Branch Dashboard.
테스트 플랫폼 선택
광고 파트너에 대해 설정된 포스트백을 올바르게 테스트하려면 먼저 테스트 할 플랫폼 (웹 브라우저 또는 모바일 앱)을 선택해야합니다. 선택 사항은 다음 단계에서 생성된 테스트 링크와 테스트 중에 표시되는 항목 모두에 영향을 줍니다.
- In the left-hand navigation, under Channels & Links, click on Ads and then Partner Management.
- Select the appropriate Ad Partner and click on the Postback Testing tab.
- Select either Web (browser) or Mobile App.
- If you select Mobile App, also select your test device from the drop-down.
- Save & Continue를 클릭합니다.
링크 생성 및 사용
선택 사항에 따라 Branch는 기능을 완전히 테스트할 수 있도록 필요한 모든 정보가 추가된 테스트 링크를 만듭니다.
To use your test link, Copy/Paste the Branch Ad Link to yourself (ex. send it to yourself via Slack).
Once you have your test link, click Test.
After you click the Test button, click the link on the device and perform the event you want to test.
테스트 결과 보기
위 단계에서 제공된 Branch 테스트 링크를 클릭하면 Branch는 클릭 및 결과 이벤트를 측정하고 어트리뷰션합니다. 이 경우 이러한 이벤트는 실시간으로 화면의 타임 라인에 표시됩니다.
For each event Branch measures, the following related data points are viewable. For each postback Branch fires, the following information is available:
- Response Status
- Response Time (in milliseconds)
- Request Timestamp
- Request URL
- Request Method
- Event Data (see previous itemized list)
유효성 검사 시 확인해야 할 사항
- 예상 매크로가 채워져 있고 응답 코드가 있는지 확인하십시오. 가장 중요한 것은 IDFA/AAID 및 Click ID가 채워져 있는지 확인하는 것입니다.
- 응답 코드가 200 (성공) 인 경우에도 광고 파트너와 함께 이벤트를 확인하는 것이 좋습니다. 이를 위해 이벤트 이름, 포스트백 요청 URL, 디바이스 ID, 타임 스탬프, 포스트백 응답 코드 및 응답 본문을 보내십시오.
- 원하는 포스트백을 찾을 수 없는 경우 Ad Links를 여러 번 테스트하여 후속 포스트백을 트리거하는 것이 좋습니다.
테스트 중지 및 다시 시작
By default, once you click Test, Branch will listen for the resulting events for 10 minutes.
You can choose to stop the testing at any time by clicking End Postback Testing in the upper right-hand corner.
You can also restart the testing at any time by clicking Start Postback Testing in the upper right-hand corner.
Updated 7 days ago